Fully automatic plastic bottle making machine in Uganda

Detail Specification
Our machine has simple innovative design and ultimate energy saving. It is engineered for efficiency and maximum production speed.

Fully Automatic Plastic Bottle Making Machine 2 Cavity Semi Automatic Pet Bottle Blowing Machine in Kampala Uganda

Advanced Infrared Preheating System for Upto 30% Power Saving.
Rapid High-Pressure Valves used for Blowing Functions.
Incremental Heater Settings by 1% to 199% for Accurate Pre-form Heat Setting.
Air & Water Lines are Push & Pull System for Easy Maintenance.
Air Recovery System is to recover & reuse the blowing air.
After Blowing orientated ready bottle online air conveyor for feeding filling machine automatically.
No Manpower needed for Preform Feeding.
Long Life PU Seal Cylinders and Higher Accuracy Valves used for Low Pressure Control System.
IP67 Grade Sensors used for Higher Accuracy & Long Life.
Advanced PLC Based System with 10” Multi colour HMI Unit used for Easy Man Machine Interfacing and Higher Machine Performance.
Multiple Products Like Mineral Water Bottles, Carbonated Soft Drinks Bottles, Hot Fill Juice Bottles at Low Investment.
Machine Can Store 50 Mould Recipe Parameters so it helps to reduce Mould Changing Time.
High Productivity with Low Power Consumption.
Easy operation & Easy maintenance.
Production Display with Man Machine Interfacing Facility. The multi colour touch screen display is used to graphically view all the parameters.
Compact Structure and low maintenance cost.
Technical Specification
Machine Specification

Machine Category

Fully Automatic

Machine Model

Astra-61- 3cvity

No of Cavities

3 Cavity

Production Capacity (Bottles/Hour)

(Depending on Moulds and pre-form Quality)

4000BPH for 300ml

3800BPH for 500ml

3600BPH for 1000ml

2000BPH for 2000ml

Blowing Capacity

100ml – 2000ml

Bottle Outlet

Through Air Conveyor

Size of the Mould (Width x Length)

120mm x 385mm

Container Specification

Types of Bottles Blowing

Water, Juice & Soft Drinks

Types of Preform

Alaska & PCO

Max. Neck Diameter

28mm

Max. Diameter of Bottle

105mm

Max. Height of the Bottle

340mm

Electrical System

Pre-heating System

Near Infrared

No of Heaters

16 Nos

Heater Capacity

2000 Watts, 220V AC

Machine Connected Power

12KW, 3 Phase

Machine with accessories Connected Power

44KW, 3 Phase

Total Power Consumption (Include accessories)

31KWH (Units)

Air System

Blowing Pressure

20Bar

Working Pressure

6Bar

Air Consumption

75CFM

Required Accessories

Compressor Air Station Capacity (High Pressure)

32HP/25Bar/80CFM

Water Chiller Capacity

5Ton@10ÕC

Cooling Tower

30TR

Application / Uses
high performance AUTO PET Stretch Blow Molding Machine This is a four cavity machine suitable for you to make 200ml 300ml 500ml 750ml to 1000ml bottles

What we do?

We Manufacture , Export , Supply , Trade , Import Fully automatic plastic bottle making machine in Uganda

Call us or fill the form for more information.

What we do ? we Fully automatic plastic bottle making machine in Uganda and supply

Why Uganda for Fully automatic plastic bottle making machine ?

Uganda is a landlocked country in East Africa whose diverse landscape encompasses the snow-capped Rwenzori Mountains and immense Lake Victoria. Its abundant wildlife includes chimpanzees as well as rare birds. Remote Bwindi Impenetrable National Park is a renowned mountain gorilla sanctuary. Murchison Falls National Park in the northwest is known for its 43m-tall waterfall and wildlife such as hippos. ? Google

Introduction: In the bustling city of Kampala, Uganda, the demand for bottled beverages, household products, and personal care items continues to rise. As businesses strive to meet this demand, the choice of bottle-making technology becomes paramount. This SEO content aims to compare and contrast two popular options: the fully automatic plastic bottle making machine and the 2-cavity semi-automatic PET bottle blowing machine. By understanding their features, benefits, and suitability for Kampala’s market, businesses can make informed decisions to optimize their bottling operations and drive success.

Chapter 1: Fully Automatic Plastic Bottle Making Machine: Efficiency at Its Best The fully automatic plastic bottle making machine is a cutting-edge solution designed to streamline the bottle production process from start to finish. Here’s why businesses in Kampala should consider this option:

1. High Production Capacity: With automated processes for molding, heating, and cooling, fully automatic machines can produce a large volume of plastic bottles rapidly, meeting the demands of Kampala’s thriving market.
2. Precision Engineering: Fully automatic machines ensure consistent bottle quality and dimensional accuracy, minimizing defects and waste in the production process.
3. Energy Efficiency: Equipped with advanced energy-saving features, fully automatic machines help businesses reduce their environmental footprint and operating costs.
4. Minimal Labor Requirement: By eliminating the need for manual intervention in the production cycle, fully automatic machines optimize labor resources and enhance operational efficiency.

Chapter 2: 2-Cavity Semi-Automatic PET Bottle Blowing Machine: Flexibility and Affordability While fully automatic machines offer unparalleled efficiency, 2-cavity semi-automatic PET bottle blowing machines provide a more flexible and cost-effective solution for businesses in Kampala. Here’s what sets them apart:

1. Lower Initial Investment: Semi-automatic machines require a smaller upfront investment compared to their fully automatic counterparts, making them an attractive option for startups and small-scale businesses in Kampala.
2. Flexibility in Production: With adjustable settings and manual control over the blowing process, semi-automatic machines offer greater flexibility in producing bottles of different sizes and shapes to cater to diverse market demands.
3. Easy Maintenance: Semi-automatic machines are simpler in design and require less complex maintenance procedures, reducing downtime and operational disruptions for businesses in Kampala.
4. Suitable for Small Batches: For businesses with fluctuating demand or those specializing in niche products, semi-automatic machines allow for efficient production of smaller batches without compromising on quality or efficiency.

Chapter 3: Understanding Market Dynamics in Kampala, Uganda To make an informed decision between fully automatic and semi-automatic bottle-making machines, businesses in Kampala must consider the unique characteristics of the local market. Factors to consider include:

1. Demand Volume and Variability: Assess the current and projected demand for bottled products in Kampala to determine the most suitable production capacity and technology.
2. Market Competition: Analyze the competitive landscape and consumer preferences in Kampala’s bottled products market to identify opportunities for differentiation and growth.
3. Regulatory Compliance: Ensure compliance with local regulations and quality standards governing the production and packaging of bottled products in Kampala.
4. Long-Term Growth Strategy: Align investment decisions with the long-term growth objectives and sustainability goals of your business in Kampala’s dynamic market environment.

Chapter 4: Case Studies: Success Stories of Bottle-Making Technology Adoption in Kampala, Uganda This chapter will showcase real-life examples of businesses in Kampala that have successfully implemented fully automatic or semi-automatic bottle-making machines to enhance their operations and achieve business growth. These case studies will highlight the challenges faced, the decision-making process, and the outcomes achieved through technology adoption.

Chapter 5: Making the Right Choice for Your Business in Kampala, Uganda In conclusion, both fully automatic plastic bottle making machines and 2-cavity semi-automatic PET bottle blowing machines offer unique advantages for businesses in Kampala, Uganda. To make the right choice, businesses must carefully assess their production requirements, budget constraints, and long-term growth objectives. Whether prioritizing efficiency, flexibility, or affordability, selecting the appropriate bottle-making technology can position businesses for success in Kampala’s competitive market landscape.

Conclusion: In the vibrant city of Kampala, Uganda, the choice of bottle-making technology can significantly impact the success and sustainability of businesses in the bottled products industry. By weighing the benefits and considerations of fully automatic and semi-automatic machines and aligning them with local market dynamics and business objectives, businesses can make informed decisions to optimize their bottling operations and capitalize on growth opportunities in Kampala’s burgeoning market.

Cities We Supply :

1. Kampala
2. Entebbe
3. Jinja
4. Gulu
5. Mbarara
6. Mbale
7. Masaka
8. Mukono
9. Kasese
10. Hoima