Pet Blowing Machine 2 Cavity
Features of Pet Blowing Machine 2 Cavity
Machine Category | Fully Automatic |
Machine Model | Astra-61- 2-Cvity |
No of Cavities | 2 Cavity |
Production Capacity (Bottles/Hour) (Depending on Moulds and pre-form Quality) | 2700BPH for 300ml 2550BPH for 500ml 2400BPH for 1000ml 1300BPH for 2000ml |
Blowing Capacity | 100ml – 2000ml |
Detail Specification
Our machine has simple innovative design and ultimate energy saving. It is engineered for efficiency and maximum production speed.
- Advanced Infrared Preheating System for Up to 30% Power Saving.
- Blowing Toggle System for Easy and Lesser Mould Changing Time (Max.10min).
- Rapid High-Pressure Valves used for Blowing Functions.
- Incremental Heater Settings by 1% to 199% for Accurate Pre-form Heat Setting.
- Air & Water Lines are Push & Pull System for Easy Maintenance.
- Air Recovery System is to recover & reuse the blowing air.
- After Blowing orientated ready bottle can be collected automatically by using belt conveyor.
- No Manpower needed for Preform Feeding.
- Long Life PU Seal Cylinders and Higher Accuracy Valves used for Low Pressure Control System.
- IP67 Grade Sensors used for Higher Accuracy & Long Life.
- Advanced PLC Based System with 10” Multi colour HMI Unit used for Easy Man Machine Interfacing and Higher Machine Performance.
- Multiple Products Like Mineral Water Bottles, Carbonated Soft Drinks Bottles, Hot Fill Juice Bottles at Low Investment.
- Machine Can Store 50 Mould Recipe Parameters so it helps to reduce Mould Changing Time.
Technical Specification
Bottle Outlet | Through Belt Conveyor |
Size of the Mould (Width x Thickness) | 120mm x 125mm (Each) |
Container Specification | |
Types of Bottles Blowing | Water, Juice & Soft Drinks |
Types of Preform | Alaska & PCO |
Max. Neck Diameter | 28mm |
Max. Diameter of Bottle | 102mm |
Max. Height of the Bottle | 340mm |
Electrical System | |
Pre-heating System | Near Infrared |
No of Heaters | 8 Nos |
Heater Capacity | 2000 Watts |
Machine Connected Power | 6KW, 3 Phase |
Machine with accessories Connected Power | 25KW, 3 Phase |
Total Power Consumption (Include accessories) | 18KWH (Units) |
Air System | |
Blowing Pressure | 20Bar |
Working Pressure | 6Bar |
Air Consumption | 47CFM |
Required Accessories | |
Compressor Capacity (High Pressure) | 20HP/25Bar/54CFM |
Air Dryer Capacity | 60CFM / 30Bar |
Water Chiller Capacity | 2.5Ton@10ÕC |
Application / Uses
AUTO PET Stretch Blow Molding Machine This is a four cavity machine suitable for you to make 200ml 300ml 500ml 750ml to 1000ml bottles
Product Video
Packing Designs
Size Variations
Neck diameter 19 -30 mm,
0.25L – 1L Volume Cavity Mould
Delivery Countries
Afghanistan | Dominican Republic | Lesotho | Saint Lucia |
Albania | East Timor (Timor-Leste) | Liberia | Saint Vincent and the Grenadines |
Algeria | Ecuador | Libya | Samoa |
Andorra | Egypt | Liechtenstein | San Marino |
Angola | El Salvador | Lithuania | Sao Tome and Principe |
Antigua and Barbuda | Equatorial Guinea | Luxembourg | Saudi Arabia |
Argentina | Eritrea | Madagascar | Senegal |
Armenia | Estonia | Malawi | Serbia |
Australia | Eswatini | Malaysia | Seychelles |
Austria | Ethiopia | Maldives | Sierra Leone |
Azerbaijan | Fiji | Mali | Singapore |
The Bahamas | Finland | Malta | Slovakia |
Bahrain | France | Marshall Islands | Slovenia |
Bangladesh | Gabon | Mauritania | Solomon Islands |
Barbados | The Gambia | Mauritius | Somalia |
Belarus | Georgia | Mexico | South Africa |
Belgium | Germany | Micronesia, Federated States of | Spain |
Belize | Ghana | Moldova | Sri Lanka |
Benin | Greece | Monaco | Sudan |
Bhutan | Grenada | Mongolia | Sudan, South |
Bolivia | Guatemala | Montenegro | Suriname |
Bosnia and Herzegovina | Guinea | Morocco | Sweden |
Botswana | Guinea-Bissau | Mozambique | Switzerland |
Brazil | Guyana | Myanmar (Burma) | Syria |
Brunei | Haiti | Namibia | Taiwan |
Bulgaria | Honduras | Nauru | Tajikistan |
Burkina Faso | Hungary | Nepal | Tanzania |
Burundi | Iceland | Netherlands | Thailand |
Cabo Verde | India | New Zealand | Togo |
Cambodia | Indonesia | Nicaragua | Tonga |
Cameroon | Iran | Niger | Trinidad and Tobago |
Canada | Iraq | Nigeria | Tunisia |
Central African Republic | Ireland | North Macedonia | Turkey |
Chad | Israel | Norway | Turkmenistan |
Chile | Italy | Oman | Tuvalu |
China | Jamaica | Pakistan | Uganda |
Colombia | Japan | Palau | Ukraine |
Comoros | Jordan | Panama | United Arab Emirates |
Congo, Democratic Republic of the | Kazakhstan | Papua New Guinea | United Kingdom |
Congo, Republic of the | Kenya | Paraguay | United States |
Costa Rica | Kiribati | Peru | Uruguay |
Côte d’Ivoire | Korea, North | Philippines | Uzbekistan |
Croatia | Korea, South | Poland | Vanuatu |
Cuba | Kosovo | Portugal | Vatican City |
Cyprus | Kuwait | Qatar | Venezuela |
Czech Republic | Kyrgyzstan | Romania | Vietnam |
Denmark | Laos | Russia | Yemen |
Djibouti | Latvia | Rwanda | Zambia |
Dominica | Lebanon | Saint Kitts and Nevis | Zimbabwe |
Delivery Time
We will take Max 1 month to deliver your product at your office.