Detail Specification
Our machine has simple innovative design and ultimate energy saving. It is engineered for efficiency and maximum production speed.

Fully Automatic Plastic Bottle Making Machine 2 Cavity Semi Automatic Pet Bottle Blowing Machine

Advanced Infrared Preheating System for Upto 30% Power Saving.
Rapid High-Pressure Valves used for Blowing Functions.
Incremental Heater Settings by 1% to 199% for Accurate Pre-form Heat Setting.
Air & Water Lines are Push & Pull System for Easy Maintenance.
Air Recovery System is to recover & reuse the blowing air.
After Blowing orientated ready bottle online air conveyor for feeding filling machine automatically.
No Manpower needed for Preform Feeding.
Long Life PU Seal Cylinders and Higher Accuracy Valves used for Low Pressure Control System.
IP67 Grade Sensors used for Higher Accuracy & Long Life.
Advanced PLC Based System with 10” Multi colour HMI Unit used for Easy Man Machine Interfacing and Higher Machine Performance.
Multiple Products Like Mineral Water Bottles, Carbonated Soft Drinks Bottles, Hot Fill Juice Bottles at Low Investment.
Machine Can Store 50 Mould Recipe Parameters so it helps to reduce Mould Changing Time.
High Productivity with Low Power Consumption.
Easy operation & Easy maintenance.
Production Display with Man Machine Interfacing Facility. The multi colour touch screen display is used to graphically view all the parameters.
Compact Structure and low maintenance cost.
Technical Specification
Machine Specification

Machine Category

Fully Automatic

Machine Model

Astra-61- 3cvity

No of Cavities

3 Cavity

Production Capacity (Bottles/Hour)

(Depending on Moulds and pre-form Quality)

4000BPH for 300ml

3800BPH for 500ml

3600BPH for 1000ml

2000BPH for 2000ml

Blowing Capacity

100ml – 2000ml

Bottle Outlet

Through Air Conveyor

Size of the Mould (Width x Length)

120mm x 385mm

Container Specification

Types of Bottles Blowing

Water, Juice & Soft Drinks

Types of Preform

Alaska & PCO

Max. Neck Diameter

28mm

Max. Diameter of Bottle

105mm

Max. Height of the Bottle

340mm

Electrical System

Pre-heating System

Near Infrared

No of Heaters

16 Nos

Heater Capacity

2000 Watts, 220V AC

Machine Connected Power

12KW, 3 Phase

Machine with accessories Connected Power

44KW, 3 Phase

Total Power Consumption (Include accessories)

31KWH (Units)

Air System

Blowing Pressure

20Bar

Working Pressure

6Bar

Air Consumption

75CFM

Required Accessories

Compressor Air Station Capacity (High Pressure)

32HP/25Bar/80CFM

Water Chiller Capacity

5Ton@10ÕC

Cooling Tower

30TR

Application / Uses
high performance AUTO PET Stretch Blow Molding Machine This is a four cavity machine suitable for you to make 200ml 300ml 500ml 750ml to 1000ml bottles

What we do?

We Manufacture , Export , Supply , Trade , Import Fully automatic plastic bottle making machine in Georgia

Call us or fill the form for more information.

What we do ? we Fully automatic plastic bottle making machine in Georgia and supply

Why Georgia for Fully automatic plastic bottle making machine ?

Georgia, a country at the intersection of Europe and Asia, is a former Soviet republic that’s home to Caucasus Mountain villages and Black Sea beaches. It’s famous for Vardzia, a sprawling cave monastery dating to the 12th century, and the ancient wine-growing region Kakheti. The capital, Tbilisi, is known for the diverse architecture and mazelike, cobblestone streets of its old town. ? Google

Introduction

In the dynamic world of packaging, innovation and efficiency are the keys to success. In Georgia, businesses are increasingly turning to advanced machinery to meet the rising demand for high-quality plastic bottles. One such game-changing piece of equipment is the Fully Automatic Plastic Bottle Making Machine, complemented by the 2-Cavity Semi-Automatic PET Bottle Blowing Machine. This comprehensive guide delves into the transformative impact of these machines on Georgia’s packaging industry, highlighting their features, benefits, and success stories.

The Packaging Industry Landscape in Georgia

The packaging industry in Georgia is experiencing rapid growth, driven by the expanding food and beverage sector, rising consumer expectations, and increasing emphasis on sustainability. Companies are constantly seeking innovative solutions to enhance production efficiency, reduce costs, and maintain high standards of quality. The introduction of advanced machinery such as the Fully Automatic Plastic Bottle Making Machine and the 2-Cavity Semi-Automatic PET Bottle Blowing Machine is a testament to this evolution, offering unparalleled benefits to businesses across the state.

Fully Automatic Plastic Bottle Making Machine: An Overview

Features and Technology

The Fully Automatic Plastic Bottle Making Machine is a state-of-the-art piece of equipment designed to streamline the production process of plastic bottles. This machine boasts advanced features such as automatic preform loading, heating, and blowing, all integrated into a single unit. The sophisticated control system ensures precise temperature regulation and optimal performance, resulting in consistently high-quality bottles.

Efficiency and Productivity

One of the most significant advantages of the Fully Automatic Plastic Bottle Making Machine is its ability to operate continuously with minimal human intervention. This level of automation drastically reduces labor costs and minimizes the risk of errors, leading to higher productivity and efficiency. The machine’s high-speed operation enables businesses to meet large-scale production demands, making it an invaluable asset for companies looking to scale their operations.

Versatility and Customization

The Fully Automatic Plastic Bottle Making Machine is highly versatile, capable of producing bottles of various shapes and sizes to cater to different market needs. This adaptability allows businesses to diversify their product offerings and cater to a broader customer base. Additionally, the machine can be customized with specific molds and configurations to meet unique production requirements, further enhancing its appeal.

2-Cavity Semi-Automatic PET Bottle Blowing Machine: An Overview

Key Features and Benefits

The 2-Cavity Semi-Automatic PET Bottle Blowing Machine is a robust and reliable solution for businesses seeking a balance between automation and manual control. This machine is equipped with two cavities, allowing it to produce two bottles simultaneously, thus doubling the production capacity compared to single-cavity machines. Its semi-automatic operation means that while some processes are automated, others require manual intervention, offering a blend of efficiency and control.

Cost-Effectiveness

For small to medium-sized businesses, the 2-Cavity Semi-Automatic PET Bottle Blowing Machine offers a cost-effective solution without compromising on quality. Its lower initial investment and operational costs make it an attractive option for companies looking to optimize their production budget. Moreover, the machine’s energy-efficient design helps reduce utility expenses, further enhancing its cost-effectiveness.

Ease of Use and Maintenance

One of the standout features of the 2-Cavity Semi-Automatic PET Bottle Blowing Machine is its user-friendly interface and straightforward maintenance requirements. The machine is designed for easy operation, with intuitive controls that minimize the learning curve for operators. Routine maintenance is simplified, ensuring that the machine remains in optimal condition with minimal downtime.

Impact on the Packaging Industry in Georgia

Enhancing Production Capabilities

The introduction of the Fully Automatic Plastic Bottle Making Machine and the 2-Cavity Semi-Automatic PET Bottle Blowing Machine has significantly enhanced the production capabilities of businesses in Georgia. These machines enable companies to produce high volumes of bottles with consistent quality, meeting the increasing demand from various sectors such as beverages, pharmaceuticals, and personal care products.

Improving Quality and Consistency

Quality and consistency are paramount in the packaging industry, and these machines excel in delivering both. The advanced technology and precise control mechanisms ensure that every bottle produced meets stringent quality standards. This level of reliability is crucial for businesses aiming to maintain their reputation and customer satisfaction.

Reducing Operational Costs

Operational efficiency directly impacts the bottom line, and the Fully Automatic Plastic Bottle Making Machine and the 2-Cavity Semi-Automatic PET Bottle Blowing Machine offer significant cost-saving benefits. By reducing labor requirements and minimizing waste, these machines help businesses lower their operational costs. Additionally, their energy-efficient designs contribute to long-term savings on utility bills.

Supporting Sustainability Efforts

Sustainability is an increasingly important consideration in the packaging industry. Both the Fully Automatic Plastic Bottle Making Machine and the 2-Cavity Semi-Automatic PET Bottle Blowing Machine support eco-friendly practices by optimizing material usage and minimizing waste. Businesses in Georgia can leverage these machines to enhance their sustainability initiatives and appeal to environmentally conscious consumers.

Case Studies: Success Stories from Georgia

Case Study 1: Beverage Manufacturer

A leading beverage manufacturer in Georgia adopted the Fully Automatic Plastic Bottle Making Machine to streamline its production process. The machine’s high-speed operation and consistent output allowed the company to meet growing demand without compromising on quality. As a result, the manufacturer was able to expand its product line and increase market share.

Case Study 2: Pharmaceutical Company

A pharmaceutical company in Georgia implemented the 2-Cavity Semi-Automatic PET Bottle Blowing Machine to improve its packaging efficiency. The machine’s versatility enabled the company to produce bottles of various sizes for different product lines. The cost-effective nature of the machine helped the company reduce operational expenses, allowing for increased investment in research and development.

Case Study 3: Personal Care Product Manufacturer

A personal care product manufacturer in Georgia utilized both the Fully Automatic Plastic Bottle Making Machine and the 2-Cavity Semi-Automatic PET Bottle Blowing Machine to enhance its packaging operations. The combination of these machines provided the manufacturer with the flexibility to produce a wide range of bottle designs while maintaining high production efficiency. This adaptability enabled the company to launch new products quickly and stay ahead of market trends.

Future Outlook and Opportunities

Technological Advancements

The future of the packaging industry in Georgia looks promising, with ongoing technological advancements paving the way for even greater efficiency and innovation. The integration of Industry 4.0 technologies, such as IoT and AI, is expected to further enhance the capabilities of machines like the Fully Automatic Plastic Bottle Making Machine and the 2-Cavity Semi-Automatic PET Bottle Blowing Machine. These advancements will enable businesses to achieve unprecedented levels of automation, precision, and control.

Sustainable Packaging Solutions

As sustainability becomes a top priority for consumers and businesses alike, the packaging industry is poised to undergo a significant transformation. Companies in Georgia can leverage the latest machinery to develop eco-friendly packaging solutions that reduce environmental impact. The adoption of recyclable and biodegradable materials, coupled with energy-efficient production processes, will play a crucial role in shaping the future of the industry.

Expanding Market Opportunities

The growing demand for high-quality packaging solutions presents numerous opportunities for businesses in Georgia. By investing in advanced machinery like the Fully Automatic Plastic Bottle Making Machine and the 2-Cavity Semi-Automatic PET Bottle Blowing Machine, companies can position themselves to capitalize on emerging market trends and expand their reach. The ability to produce diverse and customizable packaging options will be a key differentiator in a competitive market landscape.

Conclusion

In conclusion, the Fully Automatic Plastic Bottle Making Machine and the 2-Cavity Semi-Automatic PET Bottle Blowing Machine are revolutionizing the packaging industry in Georgia. These machines offer unparalleled benefits in terms of efficiency, productivity, and quality, enabling businesses to meet the evolving demands of the market. By embracing these advanced technologies, companies can enhance their production capabilities, reduce operational costs, and support sustainability efforts. The future of packaging in Georgia is bright, with endless possibilities for innovation and growth.

Cities We Supply :

• Atlanta
• Augusta
• Columbus
• Macon
• Savannah
• Athens
• Sandy Springs
• Roswell
• Albany
• Johns Creek
• Warner Robins
• Alpharetta
• Marietta
• Valdosta
• Smyrna
• Dunwoody
• Rome
• Peachtree City
• Gainesville
• Dalton